Reviews. Resources. Specifications.

Smok M80 User Manual

Click on any of the images to view the larger size version.


Comments

  • Posted by John Saunders on February 19, 2016, 3:11 am

    Thank you,after 10 days of not being able to use the Smok M80,due to it being locked.Your answer to Andy,gave me the answer,and now back vapeing away so many thanks,well done John..

  • Posted by Jo Jay on February 16, 2016, 10:22 pm

    Y'all saved the day on this one. I guess I didn't think of setting the puff count to zero because it began to lock up on me out of nowhere after, like, a year of use. And I was just flabbergasted. Anyway. I've had two of these for a long minute now and I won't ever buy one again. (For anyone about to buy one: both of mine also read the ohm's incorrectly every few drags and then the wattage goes up WAY too high all by itself. Then I have to unscrew my tank ((high voltage matrix)), hit the fire button and reattach it in order for it to read and fire correctly. Sometimes more than once in one instance. Mind you neither unit acted this way initially, and I've used this tank the entire time.) Thanks again! That should tide me over until I can replace these bombs.

  • Posted by Stephen Willis on June 30, 2015, 8:22 pm

    Thank you.

    A fantastic help. You had answered my problem due to another person having the same problem. Did not realise it had a screen lock. Was desperate. Half to have a cigarette instead. Hated it. Pleased I can now vap again.

  • Posted by Richard Nesbitt on June 25, 2015, 3:17 pm

    I just picked up the M80 Plus and after maybe 10 puffs, it tastes/smells like it's burning and hurts my throat. The temp is set to 200 and I'm at 30W with the A1 core, and it's just getting worse.

    Reply: A1 core is Kanthal wire. Temperature control only works with Ni-200 wire (Nickel 200).

  • Posted by Jeffrek Krawczyk on June 9, 2015, 8:42 pm

    Whenever I try to hit it, 9 times out of 10 it simply says power reduced, and I don't know how to stop it from doing that.

    Reply: Can't help without more information. What type of coil and resistance are you using? Wattage or Temperature Control mode? If TC, what temperature? etc.

  • Posted by Amber Bejar on June 6, 2015, 9:41 pm

    My Smok M80 says "max puffs" and im unable to use. How do I fix this? Please advise asap. Thank you

    Reply: Go to the menu and look at the setting under 'P' symbol (P = puffs). There is likely a number in there and you have reached that in the number of puffs taken on the device. Set that higher, or better yet, set it to 0. The problem is that when you reach the number of puffs shown in P, the device will not fire past that.

  • Posted by david nicholas on April 22, 2015, 9:05 pm

    So git a smok m80 but when I try to vape it displays date and time and no vape production what do I need to do please let me know ASAP thank you

    ANDY> You have the device locked. Click five times in rapid succession to unlock it.

Comments